Stone Restoration · Manhattan, NYC

Stone restoration, polishing & repair.

MarbleBLU™ of Manhattan has restored natural stone since 1997. We grind, hone, polish, repair and seal marble, limestone, travertine, terrazzo, granite, onyx and slate — in apartments, co-ops, condos, townhouses, offices, hotels and building lobbies. Restored in place, never replaced.

Dull traffic lanes, white etch marks, scratches, stains, chips, cracks, lippage and failed joints — corrected on site with diamond abrasives, wet and dustlessly, with walls, cabinetry and furniture protected.

5.0 · Read our Google reviews Read our Yelp reviews
Since 1997 Fully insured · COI provided Manhattan only

Wet diamond grinding and polishing — the same process for every natural stone, sequenced to the material.

Marble — Limestone — Travertine — Terrazzo — Granite — Onyx — Slate

The Short Answer

Can worn stone really be restored to look new again?

Yes — in almost every case. Dull stone is rarely worn out. The damage sits in a thin top layer, and once we grind that away and refinish the material underneath, it looks new again. Restoration means deep cleaning, diamond grinding, honing and polishing, then sealing — all done in place, with no demolition and no new slab.

That makes restoration a fraction of the cost of replacement in a Manhattan apartment, where new stone means demolition, fabrication, board approval and weeks of disruption. We use a wet process, cover walls, cabinets and furniture before we start, and clean up completely when we finish.

Where we work

Manhattan only — every neighborhood from the Battery to Inwood, river to river.

What restoration fixes

Dullness, etching, scratches, stains, chips, cracks, lippage and uneven wear.

What we restore

Floors and lobbies, countertops and islands, vanities, showers and fireplace surrounds.

How long it takes

A countertop or vanity usually 4–8 hours. A stone floor one to three days.

MarbleBLU™ of Manhattan — 845 Third Avenue, New York, NY 10022

Fully insured · Serving Manhattan since 1997 · Free on-site estimates · 212-627-2532

Book a free estimate
What Restoration Covers

Every stone problem has a mechanical answer.

Stone damage falls into a handful of categories, and each one needs a different approach. We assess the surface before recommending work — no polishing over a problem that needs repairing first.

Bringing stone back, not replacing it. MarbleBLU™ has restored marble and natural stone in Manhattan since 1997 — in-house crews, dustless wet work, fully insured, certificates of insurance for co-op and condo managing agents.

Book a free estimate
By Surface

Restoration by surface type — floors, baths, counters, fireplaces.

Restoration is not one-size-fits-all. Floors, counters and bathrooms face different wear and need different techniques. Here is what is involved for each — and what we actually find in Manhattan buildings.

01 — Floors & lobbies

Stone floor restoration

Floors take the hardest beating — foot traffic grinds dirt and grit into the surface, causing dullness, scratches and worn pathways. Floor restoration means diamond grinding to level the surface, honing to a smooth finish, and polishing or crystallization to bring the shine back.

For residential entryways, hallways and staircases, and for commercial lobbies where the stone must stay presentable every single day, we offer everything from a one-time deep restoration to an ongoing maintenance program. High-traffic floors are often finished honed, which shows less wear, but we can also achieve a deep gloss.

Commercial lobby floor maintenance
Stone foyer floor restoration before and after by MarbleBLU of Manhattan
Stone vanity top stain and etch removal restoration in a Manhattan bathroom

02 — Bathrooms & showers

Bathroom stone restoration

Bathrooms are uniquely hard on stone. Shower walls face hard-water film and soap scum, vanities get water rings and beauty-product stains, and grout lines darken and crack. Restoring a bathroom means addressing the stone and the grout and caulk holding the installation together.

Our bathroom work covers shower walls, shower floors, vanity tops and tub surrounds. Alongside polishing and sealing the stone we restore grout — deep-cleaning, repairing cracked joints, regrouting and recaulking with mildew-resistant seal — so the room looks fresh and watertight again.

Shower restoration

03 — Countertops & islands

Countertop & vanity restoration

Kitchen islands and counters are the most prone to acid etching — a single lemon slice, a glass of wine, or some cleaning sprays can leave dull white marks. Countertop restoration focuses on removing etches, scratches and heat rings, then sealing and applying anti-etch protection.

Because you use these surfaces every day, we use techniques that blend the repair seamlessly into the surrounding stone — you will never be able to find where the old etch was.

Polished stone countertop restored by MarbleBLU of Manhattan
The Process

Five steps from a dull surface to a clean, even, sealed finish.

Every restoration follows the same five steps. What changes is how deep we go and which finish you want. Skip a step and the surface reads patchy under light.

01

Assessment & deep cleaning

We identify the material and its current finish, then lift embedded soil, mop residue, old sealer and topical coatings before any abrasive touches the surface.

02

Diamond grinding

Coarse diamond abrasives cut the worn top layer back to sound material, removing scratches, traffic lanes, etch marks and old finish in one continuous pass.

03

Honing to the finish

Progressively finer grits bring the surface to matte, satin or high-gloss. For busy floors a honed satin finish can be the final look because it hides everyday wear.

04

Repair & polishing

Cracks injected, chips rebuilt, divots filled, failed seams re-bonded — then polishing compound brings back a reflective shine across the whole field.

05

Sealing & protection

A penetrating sealer goes on last so the stone resists water, oils and the salt and grit Manhattan winters drag through every entrance. Sealing changes how long it lasts, not how it looks.

Polished stone lobby floor in a Manhattan building

Ongoing maintenance

For high-traffic lobbies we set a recurring program — scheduled burnishing, periodic re-polishing and re-sealing — so the floor never drifts back to where it started.

Book a free estimate
Apartments, Co-ops, Towers & Hotels

Two kinds of stone work, two different jobs.

A pre-war apartment foyer and a 40-story tower lobby are the same material and the same process — but the scheduling, protection and traffic control are entirely different.

Residential

Homes, co-ops & condos

Entry foyers, vestibules, powder rooms, bathroom floors, galley kitchens, fireplace surrounds and terrace tiles — including the stone so common in pre-war buildings on the Upper East Side, the Upper West Side and along Central Park West.

  • Dull, cloudy or scratched entry and hallway floors
  • Loose, hollow or cracked tiles reset or repaired
  • Rust, oil and cleaning-product stains lifted from bathrooms
  • Honed matte finish for bathrooms, polished finish for foyers
  • Wet, dustless work with walls, cabinetry and furniture protected

Commercial

Lobbies, offices, retail & hotels

Stone was poured and laid into Manhattan building lobbies for a reason — it lasts generations. We restore it, and then keep it that way, on a schedule that fits how the building actually operates.

  • High-traffic lobby, corridor and elevator-floor restoration
  • Overnight and weekend scheduling, worked in sections
  • COI naming the building or managing agent, before we start
  • Entrance mats, wet-weather protection and slip-resistance review
  • Recurring maintenance contracts that keep the floor from drifting
See the commercial lobby service
Google Reviews

What Manhattan clients say

5.0 — MarbleBLU on Google
Read all reviews on Google

"Reasonable price. There was a gap in our corian countertop after replacing the cooktop. A new piece was laminated in and an old seam that had discolored was repaired. The fixes are invisible! Perfect work. Personnel were professional, polite, meticulous, and efficient. Friendly too. I recommend the firm without reservation."

Stephen Levenson

Google · Countertop restoration

"Reasonable price. I strongly recommend this company. For a very reasonable price, they repaired and restored my marble kitchen countertop. The work took almost 10 hours, but they were extremely professional and did not rush the job. Thoroughly impressed!"

Elizabeth Low

Google · Marble restoration

"A wonderful company! From dealing with Vicky when I called and inquired about work I needed done to the scheduling and payment, it was professional and easy. The workers came today to refinish my kitchen marble countertops. They were polite and professional. I am very happy with the work they did as well as the care they took to keep my home clean."

C Gulotta

Google · Countertop refinishing

Complete Stone Care

Full-service stone restoration

Professional stone restoration is not a single treatment — it is a systematic process combining repair, honing, polishing and protection tailored to your stone's condition. Below is every way we restore, renew and protect natural stone, with a dedicated guide for each.

Repair & damage fixing

  • Stone repair

    Cracks, chips, holes and broken edges fixed with color-matched adhesive and filler for an invisible finish.

  • Scratch removal

    Surface scratches, scuffs and wear patterns leveled with diamond abrasives, then polished back to match.

  • Stain removal

    Wine, coffee, oil, rust and organic stains extracted with professional poultices and stain-specific chemistry.

  • Etch removal

    Acid etching from wine, juice and cleaners creates dull white marks. We grind and re-polish the affected area to blend it away.

  • Countertop repair

    Chips around sink rims, cooktop openings and faucet holes, failed seams and heat rings repaired in place.

Polishing, honing & finishing

  • Stone polishing

    Restores a glossy, reflective shine to floors, counters and vanities using progressively finer diamond pads.

  • Stone honing

    A smooth matte or satin finish achieved by grinding — right for high-traffic floors, and the base before polishing.

  • Cleaning & honing

    Deep cleaning that removes embedded dirt and grime, then honing to renew the surface before polishing or sealing.

  • Floor polishing

    Diamond polishing and crystallization to make worn, dull floors shine again — residential and commercial.

  • Terrazzo restoration

    Grinding, honing, polishing and sealing for poured composite floors and pre-war apartment foyers.

Sealing, baths & protection

  • Sealing & protection

    A premium penetrating sealer fills the stone's micro-pores to block stains and make daily cleaning easier.

  • Anti-etch protection

    A protective coating that shields against the acid in wine, lemon and cleaners that causes dull white etch marks.

  • Shower restoration

    Soap scum, hard-water film, etching and failed caulk addressed on stone shower walls, curbs and floors.

  • Vanity restoration

    Vanity tops, sink surrounds and vanity fronts refinished in place, with grout and caulk restored.

  • Grout cleaning & restoration

    Deep grout cleaning, color sealing, regrouting and recaulking for stone and tile installations.

Know Your Stone

Marble, limestone, travertine and terrazzo are not interchangeable

All are calcium-based and all react to acid, but they behave very differently under a machine. This is the table we walk clients through before quoting.

Stone Hardness Typical finish How it fails Correct treatment
Marble Medium-soft, crystalline Polished or honed Acid etch rings, dull traffic wear, scratches, chips, cracks, failed seams Diamond polishing to restore gloss, etch removal, chip and seam repair, impregnating sealer
Limestone Soft, highly porous Honed matte Grey traffic lanes, acid dissolution, pitting, chipped edges, efflorescence, hazy topical sealer Deep clean, strip film, hone, rebuild chips and joints, breathable penetrating sealer
Travertine Soft, open voids Honed, filled or unfilled Voids collecting dirt, filler breaking down, hollow or loose tiles, grout erosion Clean out and refill voids, repair loose tiles, hone, seal the filled pores
Terrazzo Hard composite Polished Surface dulling, cracks at control joints, chip loss, lippage between pours Grind, hone, polish, repair chips and joints, seal
Granite, onyx & slate Hard to medium Polished, honed or cleft Surface dulling, scratches, chips at edges, mineral staining, failed seams Assessed individually — granite resists acid, onyx and slate do not; grit sequence and sealer chosen to suit

Not sure what your surface is? We identify it on site before quoting — the wrong grit sequence or the wrong sealer on the wrong stone is how a restoration turns into a repair.

Coverage

Stone restoration across Manhattan

Our office is at 845 Third Avenue in Midtown East. Our crews work the whole borough — there is no travel surcharge anywhere in Manhattan.

Working with buildings, boards and property managers

Most Manhattan stone work sits inside a co-op, condo or commercial building. We supply certificates of insurance naming the building or managing agent before we start, work within approved contractor hours and service-elevator rules, protect floors and corridors, and provide written scope and pricing suitable for board review.

FAQ

Stone restoration FAQ — Manhattan, NYC

Answers to the questions Manhattan homeowners, co-op boards and building managers ask us most. Don't see yours? Call 212-627-2532.

Still have a question about your stone?

Every stone surface is different. Talk to a restoration specialist who has worked on thousands of countertops, floors and showers across Manhattan.

Polished natural stone reception floor in a Manhattan building

Bring it back, don't replace it

Ready to restore your stone?

Tell us what the surface is and what it is doing — grey lanes, white haze, chips, cracks, stains, dull finish. We will tell you what is causing it, whether it can be restored, and what it costs.

Phones answered 24/7 · Callbacks returned within one hour

Contact

Get a free stone estimate

Tell us where the stone is and what it is doing. If you already have photos, email them to office@marbleblumanhattan.com and reference your callback request.

Phone

212-627-2532

Email

office@marbleblumanhattan.com

Office

845 Third Avenue, New York, NY 10022

Service area: Manhattan, New York City — only

Hours

Open 24 hours · 7 days a week

Free written estimates Fully insured · COI provided Manhattan only

Request a Callback

We call back within one hour — day or night.

We do not respond to solicitors or vendors.